D1-1-6, Ground Floor,
Jalan Putra Permai 3,
Taman Equine,
43300 Seri Kembangan,
Selangor, Malaysia.
+6012-617 9199
- Easson
- Electronic Precision & Analytical Balance
- Furnace
- Granite And Stand
- Hardness Tester
- Height Gauge
- Kosaka
- Measuring tools
- Metrology Accessories
- OM Scope
- Oven
- pH Meter
- Platform Weiging Scale
- Profile Projector
- Rational
- Sumspring
- Sunpoc
- Vision Engineering
The Great Services
D1-1-6, Ground Floor,
Jalan Putra Permai 3,
Taman Equine,
43300 Seri Kembangan,
Selangor, Malaysia.
D1-1-6, Ground Floor,
Jalan Putra Permai 3,
Taman Equine,
43300 Seri Kembangan,
Selangor, Malaysia.
SG Branch
Blk 674 Choa Chu Kang Crescent, #06-419 Singapore 680674.
Blk 674 Choa Chu Kang Crescent, #06-419 Singapore 680674.
+65 8198 3355
+6010-518 5858 (Malaysia)
e_tech01199z@hotmail.com+6010-518 5858 (Malaysia)
SRT-310 Surface Roughness Tester
| Previous | 1 / 5 | Next |
Main Feature
SRT-310 Surface Roughness Tester is a high accuracy instrument for measuring surface roughness. It can be used on variety of machining parts and operates on various surfaces, not only flat but also outer cone, outer cylinder, curved, pinholes, grooves, recesses grooves and axle etc. The SRT-310 allows surface roughness measurement both on metal and non-metal work-pieces. It is suitable for machining and manufacturing, quality control, inspection departments, especially for measurement on large and heavy work-piece, assembly line, on site. The SRT-310 is a Non Destructive Testing instrument, damage won’t caused to testing piece.
Specification
SRT-310 Surface Roughness Tester is a high accuracy instrument for measuring surface roughness. It can be used on variety of machining parts and operates on various surfaces, not only flat but also outer cone, outer cylinder, curved, pinholes, grooves, recesses grooves and axle etc. The SRT-310 allows surface roughness measurement both on metal and non-metal work-pieces. It is suitable for machining and manufacturing, quality control, inspection departments, especially for measurement on large and heavy work-piece, assembly line, on site. The SRT-310 is a Non Destructive Testing instrument, damage won’t caused to testing piece.
Specification
| Measuring range | The Z axis (vertical) | 320?m (-160?m~160?m) , 12600μin (-6300μin~+6300μin) | ||
| The X axis move | 17.5mm£¨0.69 inch£© | |||
| Parameter range |
Ra Rq:0.005μm-32μm Rz R3z Ry Rt Rp Rm:0.02μm-320μm RSk£º0-100% RS RSm£º1mm Tp£º0-100% |
|||
| Resolution | the Z axis (vertical) |
0.002μm/±20μm, 0.004μm/±40μm 0.008μm/±80μm, 0.02μm/±160μm |
||
| Parameter |
Ra Rz Rq Rt Rc Rp Rv R3z R3y Rz(JIS) Ry Rs Rsk Rku Rmax RsmRmr RPc Rk Rpk Rvk Mr1 Mr2 |
|||
| Graphic | load curve, Roughness profile, Primary Profile | |||
| Filter | RC,PC-RC,Gauss,D-P | |||
| The sampling length(lr) | 0.25, 0.8, 2.5mm | |||
| Assessment length£¨ln£© | Ln= lr×n n=1~5 | |||
|
Sensor |
Measuring principle | Inductance | ||
| Stylus tip | Diamond, 90 cone angle, 5μmR | |||
| Force | Measuring force<4mN, Skid force<400mN | |||
| Probe head | hard alloy, skid radius of curvature: 40mm | |||
| Traversing speed | lr=0.25, Vt=0.135mm/s | lr=0.8, | Vt=0. 5mm/s | |
| lr=2. 5, Vt=1mm/s | Return | Vt=1mm/s | ||
| Precision | 0.001μmA | |||
| Tolerance | not more than ±10% | |||
| Repeatability | not more than 6% | |||
| Power supply | Built-in Lithium ion battery 3200mAh, Charger :DC5V | |||
| Outline dimension | Main unit: 158×55×52mm drive unit: 23×27×115mm | |||
| Weight£¨main unit£© | Around 380g | |||
| Zoom of height adapter | 40mm | |||
| working Environment | Temperature: - 20¡æ ~ 40¡æ Humidity: < 90% RH | |||
| standards | ISO4287, ANSI B46.1, DIN4768, JIS B601 | |||